Insulating glass spacer bars cutting saw machine with manual
operation
1. Function
LJQJ02 Aluminum Spacer Cutting Machine is special equipment for
cutting aluminum spacer of making the insulating glass process,
consists of three parts: the input feeding section, the host, the
output feeding section, the machine is simple, safe, unique
positioning device is easy to move, accurate positioning.
2. Main technical parameter:
| Working Environment | Parameter | Unit | Remark |
| Working Temperature | 15～40℃ | | |
| Transport / Storage Temperature | -20～55℃ | | |
| Transport / Storage Humidity | 30～90% | | |
| Input Power | AC220V±10%,50Hz | | |
| Installed Power | 1.65 | KW | |
| Working Speed | 6000 | r/min | |
| Cutting Saw Diameter | 255 | ㎜ | |
| Dimension | 4260×400×1200 | ㎜ | |
3. Technical introduction
Input feeding section consists of the tray, support; the host
consists of the saw head and under bed; output feeding section
consists of the tray, calibration aluminum tube, aluminum support
block, aluminum positioning block and support.
4. Installation and adjustment
4.1 The machine should be installed in the dry, no dust, no
corrosive gas, indoor concrete floor surface, connecting the tray,
bracket, adjustable leveling base with screws, so that the input
feeding section, the host, the output feeding section are in the
same level.
4.2 First string small sliding aluminum block on the calibration
aluminum tube, and then string the calibration aluminum tube of the
tray in the output feeding section material section (scale size is
increased from the saw head), tighten the screw.
4.3 Connect big positioning aluminum block with a screw into inside
the sliding aluminum block.
5.Operation
Placed aluminum in the input feeding section, with a large aluminum
block inside of the scale (the actual cutting length of aluminum is
the distance from saw to the inside of large aluminum block),
according to the cutting length moving small sliding aluminum block
of output feeding section, and tighten.
6.Note
6.1 Before moving tools or replacement spare parts, please turn off
the power and wait when saw blade stopped.
6.2 Leveling pipe head of small size scale with aluminum
positioning block, or affect the accuracy of cutting size.
6.3 After cutting of aluminum spacer will exist few burrs.
Main feature
• It is used for cutting aluminum strip
• Allowed to cut many spacers, keep high efficiency
Technical data
| Power supply | 380V 50Hz |
| Total power | 0.55kw |
| Dimension | 5000*1050*415mm |
Jinan Lijiang Automation Equipment Co., Ltd specializes in the R &
D and manufacturing of automatic insulating glass machinery, with a
registered capital of 20 million RMB. Domestic friendly partners
include nearly one thousand customers, such as North glass,
Xinfuxing, Yaohua, etc. The products have been exported to Europe,
the United States, the Middle East, Southeast Asia, South
America,Romania, Bulgaria, Span and other countries (about 30
countries) of the world. There are about ten agencies, such as
North America, South America, Europe, Southeast Asia, the Middle
East, South Korea, etc. At the same time, we have set up branches
in New Delhi, India. At present, the export of products accounts
for more than 50% of the company's total sales.
